Monogram ZTD910 Specifications download pdf (Page 10)

Installation Options

Stainless Steel Gas Cooktop

Cooktop Installation Over a 30" Monogram

Warming Drawer, models ZTD910.

These cooktops may be installed over a 30"

Warming Drawer. Both the cooktop and the

warming drawer must be installed according

to each specific installation instruction. For

accurate planning, review the Warming

Drawer Installation Instructions in advance,

order Pub. No. 49-8937.

–Allow 2" clearance between the cooktop

bottom and the top of the cutout, or 7-1/2"

from the top of the countertop as illustrated.

Power Supply:

If local codes permit, the cooktop and warm-

ing drawer may operate from the same 120V

duplex outlet. See page 6.

IMPORTANT: Base Cabinet Requirements

for Combined Installation

A 42" wide base cabinet should be used.

Narrow custom doors or decorative stiles can

be used to fill the 6" gap on each side of the

warming drawer.

• 30" or 36" base cabinets are not

recommended.

NOTE: The support must be level, rigidly

mounted and capable of supporting 150 lbs.

Installation With

Warming Drawer

2x4 or 2x2

Runners or Solid

Bottom, 25" on Center

Install

2x4 or 2x2

Anti-Tip Block

Against Rear

Cabinet Wall

9" From Floor

to Bottom

of Block

Install 2x4 or 2x2 Anti-Tip Block

Against Rear Cabinet Wall 9" From

Cutout Floor to Bottom of Block

23-1/2" Min.

7-1/2" Min.

25"

36"

Countertop

Height

1-1/2" Cabinet Top

Cooktop 35-5/16"

18-7/8"

2-3/4" Min.

9-1/4"

28-1/2"

NOTE: When installing a Monogram Warming Drawer below

a cooktop, a solid barrier must be installed at least 1" from

the lowest point of the bottom of cooktop burner box to the

top of cutout. See Warming Drawer Installation Instructions

for details.

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Monogram ZTD910 Specifications Page 10

Comments to this Manuals

Related products and manuals for Warming drawers Monogram ZTD910