
InstallationInstructionsDouble-Door, Bottom-DrawerFree-Standing Refrigeratormonogram.com31-49049239D4535P002EspañolFor a Spanish version of this manua
Installation InstructionsSTEP 5 REMOVE THE FRESH FOOD DOORS (CONT)D. Disconnect the water line from the back of the unit by pressing down on th
11STEP 7 REPLACE THE FREEZER DRAWERSTEP 8 LEVEL THE FREEZER DRAWERATTACH AND SECURE THE DRAWER FRONT TO THE SLIDESA. Pull the slide
Installation Instructions12A. Reinstall center hinge first and torque the screws to 65 in-lbs. With the LH door at 90º to the front ofthe case, lower
Installation Instructions13 STEP 11 CONNECT WATER SUPPLYA cold water supply is required for automatic ice maker operation. If there is not a cold wa
STEP 14 LEVEL THE DOORSRemember a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section
15Notes
NOTE: While performing installations described in this book, safety glasses or goggles should be worn.For Monogram® local service in your area, call
Safety Information2BEFORE YOU BE GIN Read these in struc tions completely and carefully.• IM POR TANT – Save these instructions for local inspector’s
Safety InformationADVERTENCIA Al usar este electrodoméstico, siempre siga las precauciones básicas de seguridad, incluyendo lo siguiente:• Este elect
Planning Information4PRODUCT DIMENSIONS AND CLEARANCES ZWE23E Models70 1/2"(179.1)36" (91.4)30 7/16"(77.3)24 3/8"(61.9)37 1/2"
Planning Information5PRODUCT DIMENSIONS AND CLEARANCES ZWE23P Models70 1/2"(179.1)36" (91.4)30 1/2"(77.5)23 3/4"(60.3)37 1/4"
Installation Instructions6TOOLS REQUIRED• Adjustable wrench• 3/8” socket ratchet/driver• Phillips head screwdriver• Flat-Head ScrewdriveR• 5/32”, 3/32
Installation Instructions7STEP 2 LOCATE ANTI-TIP BRACKETA. Place the anti-tip floor bracket locator template (included inside the anti-tip kit) onto
Installation InstructionsSTEP 2C POSITION THE REFRIGERATOR TO ENGAGE THE ANTI-TIP FLOOR AND BASE BRACKETSA. Before pushing
Installation Instructions9NOTE: To prevent damage, leave inside packaging, door spacer and outside protective wrap in place until the unit is moved
Comments to this Manuals